STANDARD MICROSYSTEMS CORPORATION

ETHERNET 3008TP

NIC Type      Ethernet
Transfer Rate 10Mbps
Data Bus      8-bit ISA
Topology      Linear Bus

              Star
Wiring Type   Unshielded twisted pair

              AUI transceiver via DB-15 port
Boot ROM      Available

[Image]

                             I/O BASE ADDRESS

  Address     SW1/1   SW1/2    SW1/3    SW1/4    SW1/5    SW1/6    SW1/7

  »   300h     On       On       On      Off      Off      On        On

      200h     On       On       On       On      Off      On        On

      220h     Off      On       On       On      Off      On        On

      240h     On      Off       On       On      Off      On        On

      260h     Off     Off       On       On      Off      On        On

      280h     On       On      Off       On      Off      On        On

      2A0h     Off      On      Off       On      Off      On        On

      2C0h     On      Off      Off       On      Off      On        On

      2E0h     Off     Off      Off       On      Off      On        On

      320h     Off      On       On      Off      Off      On        On

      340h     On      Off       On      Off      Off      On        On

      360h     Off     Off       On      Off      Off      On        On

      380h     On       On      Off      Off      Off      On        On

      3A0h     Off      On      Off      Off      Off      On        On

      3C0h     On      Off      Off      Off      Off      On        On

      3E0h     Off     Off      Off      Off      Off      On        On

                                 BOOT ROM

                 Setting                               SW1/8

  »                Disabled                             Off

                   Enabled                               On

                            BASE MEMORY ADDRESS

    Address      SW2/1     SW2/2     SW2/3     SW2/4    SW2/5     SW2/6

  »   D0000h       On        On       Off       On       Off       Off

      C0000h       On        On       On        On       Off       Off

      C4000h      Off        On       On        On       Off       Off

      C8000h       On       Off       On        On       Off       Off

      CC000h      Off       Off       On        On       Off       Off

      D4000h      Off        On       Off       On       Off       Off

      D8000h       On       Off       Off       On       Off       Off

      DC000h      Off       Off       Off       On       Off       Off

      E0000h       On        On       On        Off      Off       Off

      E4000h      Off        On       On        Off      Off       Off

      E8000h       On       Off       On        Off      Off       Off

      EC000h      Off       Off       On        Off      Off       Off

                             INTERRUPT REQUEST

    IRQ         JP1A         JP1B        JP1C         JP1D        JP1E

  »     3      Closed        Open        Open         Open        Open

        2       Open         Open        Open         Open       Closed

        4       Open        Closed       Open         Open        Open

        5       Open         Open       Closed        Open        Open

        7       Open         Open        Open        Closed       Open

                                CABLE TYPE

            Type               JP2         JP3       Pulse Transformer T1

  »    Unshielded twisted      Open        Open           Installed
              pair

       AUI transceiver via     Open       Closed        Not installed
           DB-15 port

                             DIAGNOSTIC LED(S)

       LED               Status                     Condition

       LED1                On            Twisted pair network connection
                                                     is good

       LED1               Off            Twisted pair network connection
                                                    is broken

       LED2                On                Data is being received

       LED2               Off              Data is not being received

       LED3                On               Data is being transmitted

       LED3               Off             Data is not being transmitted